High and low temperature test chambers are generally placed in the laboratory to identify the high and low temperature resistance of products. With the development of various industries, the performance of products is becoming more and more strict. Thus, the application scope of high and low temperature test chamber has been driven, and has gradually extended to more fields from various mechanical industries and scientific research institutions. Nowadays, many users have placed high and low temperature test boxes in office buildings, so there is a problem. Can I get in the elevator of the office building and the door equipment of the office< br />


The general standard is that it is difficult to enter the office building. In order to meet the requirements of customers. High and low temperature test chamber manufacturers can make component type. 1. Put the controller of the test chamber on the top, and the left and right width can be reduced by about 20cm. 2. Disassemble the test chamber and the refrigeration system, and the height can be reduced by half of the total height of the equipment< br />


Therefore, when selecting the high and low temperature test chamber, users should not only consider the test, but also consider the placement site of the test chamber. If the door size and elevator size are not enough, whether the doors and windows can be removed and whether hoisting can be used. If not, the test chamber with suitable volume shall be selected according to the size of the test and door, and it shall be made into a detachable high and low temperature test chamber with left and right or up and down. These need to be determined through detailed communication between users and manufacturers.